The program returns
LIMIT MIN 0
LIMIT MIN 1
LIMIT MAX 2
LIMIT MAX 3
LIMIT MAX 4
LIMIT MAX 5
LIMIT MAX 6
Well even if I had troubles with prevous step, I tried this one but nothing moves
D17 is always returning 0, -90, 0, 0, 0, 0, 93 and D22 doesn’t change any of it.
And M503 is still returning X0.02 Y90.00 Z61.87 U0.00 V0.02 W0.02
I defenitly did something wrong ! :p
M503 returns a position on the Z axis about 61.3
Didi I do something wrong ?
False alarm, with the master downloaded directly from GitHub, it seems to be okay ! I’ve just uploaded the code into the Arduino
There is no ‘presets/’ folder in any of the archives that we can download. And no ‘libraries’ folder neither .
Could you add them please ?
The cables I had were way shorter than necessary ! And where does the white rubber sheaths come from ? Maybe that’s the cause of my problem, I don’t have them :/
Very clean design, it went very smoothly !
Note for the future : it’s the female end of the Servo Extension Cable that goes close to the Fork
The inner holes seem to be aligned, but I really don’t know if it’s OK… Should they be perfectly aligned ?
Page 1 of 2
Next
Once they have, you'll be able to view a graph of their reputation gained over time.
Here's a preview of what the graph will look like:
No reputation gained yet.
The program returns
LIMIT MIN 0
LIMIT MIN 1
LIMIT MAX 2
LIMIT MAX 3
LIMIT MAX 4
LIMIT MAX 5
LIMIT MAX 6
Well even if I had troubles with prevous step, I tried this one but nothing moves
D17 is always returning 0, -90, 0, 0, 0, 0, 93 and D22 doesn’t change any of it.
And M503 is still returning X0.02 Y90.00 Z61.87 U0.00 V0.02 W0.02
I defenitly did something wrong ! :p
M503 returns a position on the Z axis about 61.3
Didi I do something wrong ?
False alarm, with the master downloaded directly from GitHub, it seems to be okay ! I’ve just uploaded the code into the Arduino
There is no ‘presets/’ folder in any of the archives that we can download. And no ‘libraries’ folder neither .
Could you add them please ?
The cables I had were way shorter than necessary ! And where does the white rubber sheaths come from ? Maybe that’s the cause of my problem, I don’t have them :/
Very clean design, it went very smoothly !
Note for the future : it’s the female end of the Servo Extension Cable that goes close to the Fork
The inner holes seem to be aligned, but I really don’t know if it’s OK… Should they be perfectly aligned ?
Page 1 of 2
Next