Step Type:

Drag to rearrange

Secure the Power Cable to the PSU Screw Terminals

Test the Rocker Switch and PSU by connecting the Power Plug and turning the Switch ON

Be careful to NOT touch the screw terminals with your bare hands.

If the Green LED light turns on, it's a good sign

Use the Multimeter to make sure the output voltage is approximately 24V, adjust using the Philip Head Screw

Left 3 terminals are Positive Output

Middle 3 terminals are Ground/Negative Output

Once test is successful, Turn off the Power using the Switch and unplug the Power Plug

Your contributions are licensed under the open source Creative Commons license.