Help

Step Type:

Drag to rearrange

Use two M4 Hex nuts per M4x14mm Screws as spacer on the Acrylic Mounting Plate

Align the PSU and the Acrylic Mounting Plate as shown in the figure exactly

Take a closer look on the Screw Terminal of PSU

Take a closer look on the "Half Moon" cut on the Plate

Flip the Acrylic Mounting Plate on to the PSU

DON'T tighten 1 screw all the way at a time, this will cause the plate to flex and cause it break

Your contributions are licensed under the open source Creative Commons license.