Skip to main content
/

Site Navigation

Your Account

Choose Language

Help

Step Type:

Drag to rearrange

Insert the Rocker Switch into the Machined Case.

Some version of Rocker Switch has smaller mounting holes

if this is the case, use the M3x10mm Screws, Washers and Nylock Nuts

If not, use M4x14mm Screws and M4 Nylock Nuts

Secure the Rocker Switch with the fasteners

Notice the Soldering Patterns AND Length

18AWG Power Wires 65mm long

3 Wire Power Cable 365mm long

Your contributions are licensed under the open source Creative Commons license.