Editing Step 29 —
Ulna Sensor Rod Mount - 2

Step Type:

Drag to rearrange

1/8' Brass Tube should stick out at the other end of the Forearm {Elbow Tail end}

Insert 6701 Bearing to the Ulna Tube Holder {magnet end}

Insert the Ulna Tube Holder to the Elbow Tail and 1/8' Brass Tube

Secure the Brass Tube by tightening the M3 Set Screw. There's a Set Screw Tightening hole you can fit Alan Key through.

Your contributions are licensed under the open source Creative Commons license.