Step Type:

Drag to rearrange

Insert and align the Concentric Cam's Set Screw hole to the furthest of 3 holes on the brass tube and secure it using a M3 Set Screw

Do NOT screw further than you have to. You want to make sure the screw has bit into the Brass Tube Hole but no deeper than that.

Insert the 6702 Bearing to the Concentric Cam

Repeat the above process with the Bottom Eccentric Cam (medium thickness)

Insert the "B" Rotor, once the Set Screw is tightened just enough for the bearing to go in.

"B" Label side of the rotor is facing the Concentric Cam

Repeat the Orange and Yellow steps with the Top Eccentric Cam (thinnest profile) and "T" Rotor

"T" Label side of the rotor is facing away from the Concentric Cam

Your contributions are licensed under the open source Creative Commons license.