Editing Step 19 —
Elbow Tail Housing - 2

Step Type:

Drag to rearrange

Place the GT-2 Timing Belts around the Small Pulley Gears

MUST PUT THE BELTS BEFORE ELBOW TAIL!

Align one of the Elbow Tail Housing's TOP side with the Ulna Gearbox 's TOP side

Secure it in place using M3x10mm Screw

Once one side of the Tail Housing is secured, secure the other half using M3x10mm Screws

Then clamp the two halves using M3x45mm Screws and M3 NylockNuts

Your contributions are licensed under the open source Creative Commons license.