Editing Step 28 —
Ulna Sensor Rod Mount - 1

Step Type:

Drag to rearrange

Insert M3 Square Nuts into the Brass Tube Holders and secure the Nut using the M3 Set Screws

Screw in just enough to secure the Square Nuts

Connect the 1/8' Brass Tube to Ulna Rod Holder {5Ab} and tighten M3 Set Screw

Insert the 1/8' Brass Tube through the Big Pulley Gear of the Ulna Geabox end

Your contributions are licensed under the open source Creative Commons license.