Step Type:

Drag to rearrange

Align the 6706 Bearing closer to Bevel Gear to the Picasso bearing insert of 6Aa Picasso

Hand Sensor Chip should be facing the Hand Gearbox

Clamp the 6Ab Picasso and secure it by tightening the M3x20mm Screws on the Hand Gearbox

Use M3 Set Screw to secure the Sensor Shaft to the Picasso Box

Insert M3x45mm Screws on one side and M3 Nuts on the other, to clamp the Picasso Box

Your contributions are licensed under the open source Creative Commons license.