Step Type:

Drag to rearrange

Prepare the following components:

[3D] - 6Da Hand GB Output Disks

Thicker Output Disk is considered "Top"

6706 Bearing [30x37x4mm] (x1)

M3x20mm Screws (x8)

M3 Hex Nuts (x11)

Insert M3 Hex Nuts in the nut inserts of Both Output Disks

Align the 3 middle holes of Top and Bottom Disks. Clamp the 6706 bearing with the Output Disks using M3x20mm Screws

Your contributions are licensed under the open source Creative Commons license.