Step Type:

Drag to rearrange

This step may be the hardest to execute so follow through carefully. Use Alan Key as a "hook" if you need to

Align the 400mm GT2-Timing Belt {outer belt} to the Top Idler

Take the Belt off of the Gearbox Pulley if you need to.

Make sure the SMOOTH side of the belt is on the Idler

Rotate the Top Fork and let it FLOAT over the Bottom Fork

Put the 400mm Belt back on the Pulley

Notice that the Top Fork is shifted forward relative to the Bottom Fork

While the Fork is shifted forward, put the 336mm GT2-Timing Belt on the Inner Pulley on the other side

Your contributions are licensed under the open source Creative Commons license.