You're viewing a previously published revision of this guide.  View latest revision

Older
Dec 12, 2019 - 04:12:42
Aug 16, 2020 - 11:08:09 Aug 16, 2020 - 11:08:32 Aug 16, 2020 - 10:08:02 May 08, 2020 - 10:05:53 May 08, 2020 - 10:05:05 May 08, 2020 - 10:05:47 May 08, 2020 - 10:05:22 May 08, 2020 - 10:05:19 May 08, 2020 - 10:05:55 May 08, 2020 - 10:05:12 May 08, 2020 - 10:05:31 May 08, 2020 - 10:05:01 May 08, 2020 - 10:05:25 Feb 12, 2020 - 09:02:25 Feb 03, 2020 - 09:02:17 Jan 31, 2020 - 05:01:37 Jan 31, 2020 - 05:01:19 Jan 31, 2020 - 05:01:40 Jan 31, 2020 - 05:01:04 Jan 31, 2020 - 05:01:41 Jan 31, 2020 - 05:01:38 Jan 31, 2020 - 05:01:22 Jan 31, 2020 - 05:01:30 Jan 31, 2020 - 05:01:19 Jan 31, 2020 - 05:01:23 Jan 31, 2020 - 05:01:39 Jan 31, 2020 - 05:01:21 Jan 31, 2020 - 04:01:03 Jan 31, 2020 - 04:01:20 Jan 31, 2020 - 04:01:52 Jan 31, 2020 - 04:01:14 Jan 31, 2020 - 04:01:27 Jan 31, 2020 - 04:01:51 Jan 31, 2020 - 04:01:57 Jan 31, 2020 - 02:01:01 Jan 31, 2020 - 02:01:02 Jan 31, 2020 - 02:01:55 Jan 31, 2020 - 02:01:24 Jan 31, 2020 - 02:01:58 Jan 31, 2020 - 02:01:23 Jan 31, 2020 - 02:01:45 Jan 31, 2020 - 02:01:21 Jan 31, 2020 - 02:01:11 Jan 27, 2020 - 05:01:57 Jan 27, 2020 - 05:01:41 Jan 27, 2020 - 01:01:47 Jan 27, 2020 - 01:01:38 Jan 27, 2020 - 01:01:05 Jan 27, 2020 - 01:01:54 Jan 27, 2020 - 01:01:05 Jan 27, 2020 - 01:01:28 Jan 27, 2020 - 12:01:32 Jan 27, 2020 - 12:01:02 Jan 27, 2020 - 12:01:56 Jan 27, 2020 - 12:01:55 Jan 27, 2020 - 12:01:48 Jan 21, 2020 - 12:01:38 Jan 21, 2020 - 12:01:54 Jan 21, 2020 - 12:01:04 Jan 21, 2020 - 12:01:02 Jan 21, 2020 - 11:01:24 Jan 21, 2020 - 11:01:43 Jan 21, 2020 - 11:01:05 Jan 21, 2020 - 11:01:17 Jan 08, 2020 - 11:01:19 Jan 03, 2020 - 05:01:53 Jan 03, 2020 - 05:01:23 Jan 03, 2020 - 05:01:49 Dec 17, 2019 - 12:12:32 Dec 17, 2019 - 12:12:01 Dec 17, 2019 - 11:12:42 Dec 17, 2019 - 11:12:08 Dec 17, 2019 - 11:12:53 Dec 16, 2019 - 03:12:35 Dec 16, 2019 - 03:12:35 Dec 16, 2019 - 02:12:24 Dec 16, 2019 - 02:12:45 Dec 16, 2019 - 02:12:12 Dec 16, 2019 - 12:12:28 Dec 16, 2019 - 11:12:39 Dec 16, 2019 - 11:12:24 Dec 16, 2019 - 11:12:07 Dec 16, 2019 - 11:12:56 Dec 16, 2019 - 11:12:48 Dec 16, 2019 - 11:12:55 Dec 16, 2019 - 11:12:12 Dec 16, 2019 - 11:12:03 Dec 16, 2019 - 10:12:37 Dec 16, 2019 - 10:12:28 Dec 16, 2019 - 10:12:52 Dec 16, 2019 - 10:12:02 Dec 16, 2019 - 10:12:27 Dec 16, 2019 - 10:12:49 Dec 16, 2019 - 09:12:01 Dec 16, 2019 - 09:12:40 Dec 13, 2019 - 06:12:52 Dec 13, 2019 - 06:12:18 Dec 13, 2019 - 06:12:59 Dec 13, 2019 - 06:12:15 Dec 13, 2019 - 06:12:20 Dec 13, 2019 - 05:12:54 Dec 13, 2019 - 05:12:46 Dec 13, 2019 - 05:12:32 Dec 13, 2019 - 02:12:33 Dec 12, 2019 - 05:12:52 Dec 12, 2019 - 05:12:21 Dec 12, 2019 - 04:12:17 Dec 12, 2019 - 04:12:03 Dec 12, 2019 - 04:12:26 Dec 12, 2019 - 04:12:42 Dec 12, 2019 - 03:12:20 Dec 12, 2019 - 03:12:54 Dec 12, 2019 - 03:12:31 Dec 12, 2019 - 03:12:13 Dec 12, 2019 - 02:12:32 Dec 12, 2019 - 02:12:17 Dec 12, 2019 - 02:12:58
Newer

4. Elbow Tail and Ulna Assembly

Written By: Dan Royer
  • Comments: 3
  • Favorites: 0
  • Completions: 1

Difficulty

Moderate

Steps

4

Time Required

Suggest a time??

Sections

1

Flags

2

In Progress

In Progress

This guide is currently being written. Reload periodically to see the latest changes.

Private

Private

This guide will not appear in search results and can only be viewed by team members!

Quiz

0

    • Package #4

    • Ulna Gearbox portion of Package #5

    • Alan Keys

    • Socket Drivers

    • Needle Nose Plier

    • Prepare the following components:

    • 5B - Eccentric Cams

    • 5B - Top and Bottom Rotors

    • 3/8'x396.35mm Brass Tube

    • 15x21x4mm 6702 Bearing (x3)

    • M3x4mm Set Screw (x3)

  3. Insert the 6702 Bearings in the Rotors Make sure the Bearing is all the way in.

    • Insert the 6702 Bearings in the Rotors

    • Make sure the Bearing is all the way in.

    • Prepare the Cams and Brass Tube that acts as the input shaft

    • Top Eccentric Cam (thinnest profile)

    • Bottom Eccentric Cam (medium profile)

    • Concentric Cam (thickest profile)

    • Machined Brass Tube, 3 hole drilled end

  4. Insert and align the Concentric Cam's Set Screw hole to the furthest of 3 holes on the brass tube and secure it using a M3 Set Screw Do NOT screw further than you have to. You want to make sure the screw has bit into the Brass Tube Hole but no deeper than that. Place the 6702 Bearing

    • Insert and align the Concentric Cam's Set Screw hole to the furthest of 3 holes on the brass tube and secure it using a M3 Set Screw

    • Do NOT screw further than you have to. You want to make sure the screw has bit into the Brass Tube Hole but no deeper than that.

    • Place the 6702 Bearing

    • Repeat the above process with the Bottom Eccentric Cam (medium thickness)

    • Insert the "B" Rotor, once the Set Screw in secured just enough for the bearing to go in.

    • Repeat the Orange and Yellow steps with the Top Eccentric Cam (thinnest profile) and "T" Rotor

Author

Dan Royer

Member since: 2/13/19

7,136 Reputation

37 Guides authored

View Statistics:

Past 24 Hours: 0

Past 7 Days: 1

Past 30 Days: 3

All Time: 478