Changes to Step #3

Edit by Dan Royer —

Edit approved by Dan Royer

Before
After
Unchanged

Step Lines

[title] Portable board setup
[* 1] Option 1: Using the extra triangle and the m3 screws, clamp the corner mounts to the board. ''We do not have a satisfactory way to mount the electronics yet.''
[* 1] Option 2: Screw the components to the board.
[* 1] It is easiest if the center of each motor shaft is right at each corner of the board.
[* 1] Make sure your board is off the floor to leave room for the counterweights!
-[* 1] Proceed to Pen Holder setup.
+[* 1] Proceed to Counterweight & belt setup