Changes to Step #4

Edit by Dan Royer —

Edit approved by Dan Royer

Before
After
Unchanged

Step Lines

[title] Prepare the switches
[* 2] Bring the soldering iron (cleaner than shown!)...
[* 3] ...into contact with a leg of the switch and count two seconds.
[* 4] touch the solder to both the iron and the leg. it should melt and leave a drop big enough to cover the hole in the leg.
[* 5] It should look like this.
-[* 6] Be sure to do all three legs.
+[* 6] Do all three legs of both switches.