Changes to Step #2
Step Lines
| + | [title] Strip the wire ends |
|---|---|
| + | [* 2] Using a wire stripper, cut the end of the wire. Get as close to the connector as possible. |
| + | [* 4] Put the cut wires into the wire stripper and squeeze to remove the last 3-4mm of the insulating jacket. Done correctly you can strip all three in one movement. |
| + | [* 10] Turn the stripper over and tap it on a hard surface to knock the jacket pieces out of the stripping mechanism. |
| + | [* 5] Your stripped wires should look like this. |
Image 1
No previous image
Added
Image 2
No previous image
Added
Image 3
No previous image
Added