| + | [title] Run the robot unconnected |
|---|
| + | [* 1] Put your SD card in your computer and click ''save to file/SD card'' in the Makelangelo Software. |
|---|
| + | [* 1] At the bottom of the save dialog change the ***Files of Type*** to ''GCODE (ngc)''. Save your file to the SD card. |
|---|
| + | [* 1] Eject the SD card and plug it into the robot on the left side of the LCD panel. |
|---|
| + | [* 1] Click the dial, scroll down to ***print from SD card***, click again, scroll to the file, and click one more time. Follow the prompts on the LCD panel. |
|---|
| + | [* 1] Don't forget to home the robot before starting your drawing! |
|---|