Changes to Step #7

Edit by Dan Royer —

Edit approved by Dan Royer

Before
After
Unchanged

Step Lines

[title] Upgrade firmware
-[* 1] By default all Makelangelos are tested as 5s. The latest edition of Makelangelo Software for Windows includes an upgrade tool. It is located under `File > Update firmware`
+[* 1] By default all Makelangelos are tested as 5s. The latest edition of Makelangelo Software for ***Windows only*** includes an upgrade tool. It is located under ''File > Update firmware''
[* 3] In avrDude path, click the '...' and surf to ''C:\Program Files\Makelangelo\App''
[* 4] In *.hex file, do the same thing and then click on ''firmware-huge.hex''
[* 5] Connect the USB cable to the robot on the left side of the motherboard. Turn on power. Click the turning arrow button to the right of "port". A COM port should appear in the dropdown box.
[* 6] Press Start. The application should take about 20 seconds to upload the firmware.
[* 10] If it immediately says "finished", something has failed. Please contact us for more help.
+[* 1] After successful upload the LCD panel will probably say there is an EEPROM change. Accept the change.