Changes to Step #4

Edit by Dan Royer —

Edit approved by Dan Royer

Before
After
Unchanged

Step Lines

[title] Insert the extension bar
-[* 2] Using an M4 alan key (hex key), undo the screws that hold the left and right sides together.
+[* 2] Using an M3 alan key (hex key), undo the screws that hold the left and right sides together. A Torx T10 or an imperial 1/8 will also work.
[* 2] Add the extension bar and refasten the screws.
[* 3] Use the provided screws in the HUGE kit to fasten the left side motor to the other end of the extension bar.
[* 10] It can help to have a friend hold the machine while you fasten the screws. Another way is to flip it length-wise so that you can access it from both sides while it rests on the limit switches.