Changes to Step #3
Step Lines
| [title] Disconnect left side cables | |
| [* 2] There are two cables from the left side motor. A 4-wire ***stepper motor cable***... | |
| [* 3] and a 3 wire ***limit switch cable***. | |
| - | [* 1] Follow these wires back to the motherboard. |
| + | [* 1] Follow these wires back to the motherboard. Some people take a picture of how they are connected for reference. |
| [* 2] Notice the 4 wire cable is connected to the left stepper driver with the blue wire on the ***left***. | |
| [* 3] Notice the left limit switch cable is connected to the X- pin with the red wire on the ***left***. | |
| - | [* 1] With power off, gently disconnect |
| + | [* 1] With power off, gently disconnect the traced wires. |