Changes to Step #6
Step Lines
| + | [title] Cut wires for limit switches |
|---|---|
| + | [* 1] find the 3 wire JST cables that have three colors, typically red/blue/black. |
| + | [* 1] Cut the wire 43cm from one end. The second piece should be approximately 58cm. strip 5mm from the newly-cut end of both. |
| + | [* 1] if you are doing multiple machines, cut them all into two piles, then strip them, then solder them. fewer task changes is faster production. |
| + | [* 1] the short wire is for the left side of the machine. the long wire is for the right. |