Changes to Step #5
Step Lines
| + | [title] Attaching motors |
|---|---|
| + | [* 4] Insert four M3 x 35 screws through indicated holes |
| + | [* 6] Slide four 25 mm spacers onto the screws and clip on motor bracket |
| + | [* 8] Wood tab with the two holes facing bottom of the board |
| + | [* 1] Place motor, lining up screws with the holes, screw in, and unclip the motor bracket. |
Image 1
No previous image
Added
Image 2
No previous image
Added
Image 3
No previous image
Added