Changes to Step #15
Step Lines
| + | [title] Shoulder Gearbox Bottom - 2 |
|---|---|
| + | [* 2] Insert M5 Hex Nuts on the side insert of the Motor Side Bottom Half |
| + | [* 3] Insert the other two M5 Hex Nuts on the bottom inserts |
| + | [* 5] ***[Opt.]*** if the nuts are too loose in the insert, use M5x20mm Screws (or any M5 screws) to hold it in place during assembly |
Image 1
No previous image
Added
Image 2
No previous image
Added
Image 3
No previous image
Added