Changes to Step #17

Edit by Dan Royer —

Edit approved by Dan Royer

Before
After
Unchanged

Step Lines

[title] Shoulder Gearbox Motor
[* 10] ***Prepare the following components:***
[* 1] Assembled Shoulder Gearbox
- [* 2] NEMA 24x100mm Motor
+ [* 2] NEMA24 100mm Motor
[* 3] M5x20mm Screws (x4)
[* 5] Align the ***D-Cut*** of the Motor Shaft to the Gearbox Input Shaft and insert the motor all the way through.
[* 6] Align the motor body so the ***cable is pointing towards the bottom*** and secure the position using M5x20mm Screws