Changes to Step #17

Edit by Dan Royer —

Edit approved by Dan Royer

Before
After
Unchanged

Step Lines

[title] Shoulder Gearbox Motor
[* 10] ***Prepare the following components:***
- [* 1] [3D] Sensor Adapter Parts
+ [* 1] Assembled Shoulder Gearbox
[* 1] NEMA 24x100mm Motor
[* 1] M5x20mm Screws (x4)
[* 1] Align the D-Cut of the Motor Shaft to the Gearbox Input Shaft and insert the motor all the way through.
[* 1] Rotate the motor body so the cable is pointing towards the bottom and secure the position using M5x20mm Screws