Changes to Step #16

Edit by Dan Royer —

Edit approved by Dan Royer

Before
After
Unchanged

Step Lines

[title] Shoulder Gearbox Bottom - 2
-[* 2] While keeping the Gearbox on its side, insert 3.5x18.5mm Brass Tubes on each Screws
-[* 3] Insert M5 Hex Nuts on the Motor Side of the Elbow Gearbox Bottom
+[* 2] While keeping the Gearbox on its side, ***insert 3.5x18.5mm Brass Tubes*** on each Screws
+[* 3] Insert ***M5 Hex Nuts*** on the Motor Side of the Elbow Gearbox Bottom
[* 5] Insert the other Half of the Elbow Gearbox Bottom and secure it with M3 Nylock Nuts using the Alan Key and Socket Driver