Changes to Step #9

Edit by Dan Royer —

Edit approved by Dan Royer

Before
After
Unchanged

Step Lines

+[title] Shoulder Gearbox Housing - Parts
+[* 10] ***Prepare the following components:***
+ [* 2] [3D] - Shoulder Gearbox Housing Top Halves
+ [* 9] The side with ***Directional Label*** is the ***Motor Side***
+ [* 3] Assembled Input Shaft and Rotors
+ [* 4] 65x85x10mm 6813 Bearings(x2)
+ [* 5] 1/8'x23.5mm Steel Pin (x41)
+ [* 6] M3x25mm Screws (x11)
+ [* 7] M3 Nylock Nuts (x11)