| + | [title] Clamped Rotors |
|---|
| + | [* 10] The process for "T" Rotor and "B" Rotor is the same. ***We will use T rotor as our guide and repeat the same process for B rotor*** |
|---|
| + | [* 2] Insert 6702 Bearing on one half of the ***T Rotor*** |
|---|
| + | [* 3] Place the other half and clamp the Bearing together |
|---|
| + | [* 9] Make sure to align the ***T labels***, The holes and the teeth won't line up if this isn't done correctly. |
|---|
| + | [* 4] Insert ***M3x5mm Screws*** and ***Hex Nuts*** on each half of the Rotor and tighten all the Screws. |
|---|
| + | [* 11] Repeat the same Process for ***B Rotor*** |
|---|