Changes to Step #24

Edit by Dan Royer —

Edit approved by Dan Royer

Before
After
Unchanged

Step Lines

+[title] Picasso Box - Finishing Touches 2
[* 2] Insert ***M3 Square Nuts*** on the ''side of the ++Hand Face++''
[* 9] Align the ***Screw Hole*** on the ++++Hand Gearbox Output++ and ++Hand Face++++
[* 3] One of three holes are in between the ***Screw Head***
[* 5] Secure the ++Face to the Output Disk++ using ***M3x10mm Screws***