Changes to Step #24
Step Lines
| + | [* 2] Insert ***M3 Square Nuts*** on the ''side of the ++Hand Face++'' |
|---|---|
| + | [* 9] Align the ***Screw Hole*** on the ++++Hand Gearbox Output++ and ++Hand Face++++ |
| + | [* 3] One of three holes are in between the ***Screw Head*** |
| + | [* 5] Secure the ++Face to the Output Disk++ using ***M3x10mm Screws*** |
Image 1
No previous image
Added
Image 2
No previous image
Added
Image 3
No previous image
Added