Changes to Step #8

Edit by Dan Royer —

Edit approved by Dan Royer

Before
After
Unchanged

Step Lines

[title] Hand Gearbox Housing - Parts
[* 10] ***Prepare the following components:***
- [* 2] [3D] - 6D Hand Gearbox Housing {Top & Bottom}
- [* 3] [3D] - 6D Hand Gearbox Magnet Holder
+ [* 2] [3D] - 6Da Hand GB Housing {Top & Bottom}
+ [* 3] [3D] - 6Da Hand GB Magnet Holder
[* 5] 8x2.5mm Neodymium Magnet
- [* 10] Already inserted in the ''Hand Gearbox Magnet Holder''
[* 6] M3x35mm Threaded Rod
+ [* 9] Since February 2020, this is ''replaced'' with ***Brass Tube [1/8'x35mm]***
[* 7] M3x4mm Set Screws (x2)
[* 8] M3x20mm Screws (x4)