Changes to Step #8

Edit by Dan Royer —

Edit approved by Dan Royer

Before
After
Unchanged

Step Lines

[title] Hand Gearbox Housing - Parts
[* 10] ***Prepare the following components:***
[* 2] [3D] - 6D Hand Gearbox Housing {Top & Bottom}
[* 3] [3D] - 6D Hand Gearbox Magnet Holder
[* 5] 8x2.5mm Neodymium Magnet
+ [* 10] Already inserted in the ''Hand Gearbox Magnet Holder''
[* 6] M3x35mm Threaded Rod
[* 7] M3x4mm Set Screws (x2)
[* 8] M3x20mm Screws (x4)