Changes to Step #19

Edit by Dan Royer —

Edit approved by Dan Royer

Before
After
Unchanged

Step Lines

[title] Picasso Box Clamp - Parts
-[* 10] ***Prepare the following parts:***
+[* 10] ***Prepare the following components:***
[* 1] Assembled Hand Gearbox
- [* 1] Assembled Side Bevel Gearbox and Sensor Holder
- [* 1] Picasso Box Top and Bottom
- [* 1] M3x4mm Set Screws (x1)
- [* 1] M3x45mm Screws (x4)
- [* 1] M3x20mm Screws (x4)
- [* 1] M3 Hex Nuts (x8)
+ [* 2] Assembled Side Bevel Gearbox and Sensor Holder
+ [* 3] [3D] - Picasso Box {Top & Bottom}
+ [* 5] M3x4mm Set Screws (x1)
+ [* 6] M3x45mm Screws (x4)
+ [* 7] M3x20mm Screws (x4)
+ [* 8] M3 Hex Nuts (x8)