Changes to Step #16

Edit by Dan Royer —

Edit approved by Dan Royer

Before
After
Unchanged

Step Lines

-[title] Hand Sensor Holder - Sensor Cable
+[title] Sensor Shaft - Hand Sensor Cable
[* 1] Connect the Cable to the ***AS5147 Sensor*** as shown in the picture
[* 9] COLOR CODE MATTERS!!
[* 1] One wire at a time, feed the ***jumper wires*** through the ***Brass Tube***
[* 1] Make sure the ***Jumper Wires*** comes out of the ***Brass Tube*** as far as it can. NO LOOSE Cables