Changes to Step #15

Edit by Dan Royer —

Edit approved by Dan Royer

Before
After
Unchanged

Step Lines

-[title] Hand Sensor Holder - Sensor Shaft
+[title] Sensor Shaft - Hand Sensor Holder
[* 2] Mount the ***AS5147 Sensor*** on the ''++Sensor Holder++'' using the ***M2 Screws***
[* 3] Insert the ***Brass Tube*** through the ***Sensor Holder***
[* 9] ORIENTATION of the Brass Tube matters!!!!!!! Follow exactly to the picture
[* 1] Use ***M3 Set Screw*** to secure the ''++Sensor Holder++'' to the ***Brass Tube***