Changes to Step #15

Edit by Dan Royer —

Edit approved by Dan Royer

Before
After
Unchanged

Step Lines

+[title] Sensor Shaft - Hand Sensor Holder
+[* 1] Mount the Sensors on the Sensor Holder using the M2 screws
+[* 1] Insert the brass tube through the sensor holder [PIC REQUIRED]
+ [* 9] ORIENTATION of the Brass Tube matters!!!!!!! Follow exactly to the picture
+[* 1] Tighten the Set Screw just enough to secure the sensor holder in the correct position of the brass tube [PIC REQUIRED]

Image 1

No previous image

New image

Added