| - | [title] Hand Gearbox - Magnet |
|---|
| - | [* 10] ***Prepare the following parts:*** |
|---|
| - | [* 2] 6D Hand gearbox magnet8x2.5mm Neodymium MagnetM3x4mm Set Screws (x2)M3x35mm Threaded Rod with D-cut |
|---|
| - | [* 1] Insert the magnet and threaded rod on the magnet holder. Secure the rod using the set screw |
|---|
| - | [* 7] Screw assembled magnet holder and secure it using the set screw on the output disk |
|---|
| + | [title] Hand Gearbox Sensor Magnet |
|---|
| + | [* 1] Insert the ***Neodymium Magnet*** and ***M3 Threaded Rod*** in the ''++Magnet Holder++''. Secure the Rod using the ***M3 Set Screw*** |
|---|
| + | [* 7] Feed the ''other end of the Rod'' to through the ''++Input Shaft Tube++'' all the way to ***Output Disk*** |
|---|
| + | [* 1] Secure that end with a ***M3 Set Screw*** |
|---|