Changes to Step #11
Step Lines
| [title] Hand Gearbox - Magnet | |
| [* 10] ***Prepare the following parts:*** | |
| - | [* 2] 6D Hand gearbox magnet |
| - | [* 3] 8x2.5mm Neodymium Magnet |
| - | [* 4] M3x4mm Set Screws (x2) |
| - | [* 8] M3x35mm Threaded Rod with D-cut |
| + | [* 2] 6D Hand gearbox magnet8x2.5mm Neodymium MagnetM3x4mm Set Screws (x2)M3x35mm Threaded Rod with D-cut |
| [* 1] Insert the magnet and threaded rod on the magnet holder. Secure the rod using the set screw | |
| [* 7] Screw assembled magnet holder and secure it using the set screw on the output disk |