| - | [* 2] 6D output disk parts |
|---|
| - | [* 3] M3 x 20mm Screws (x8) |
|---|
| - | [* 4] M3 Hex Nuts (x11) |
|---|
| - | [* 5] 30x37x4mm 6706 Bearing (x1) |
|---|
| - | [* 1] Insert 3 x M3 Hex nuts in the top output disk |
|---|
| - | [* 7] Clamp the 6706 bearing with 2 output disk using M3x20mm Screws and nuts |
|---|
| - | [* 8] Slide the housing Top onto the bearing |
|---|
| + | [* 2] [3D] - 6D Output Disk Components |
|---|
| + | [* 1] ***Thicker Output Disk*** is considered ++"Top"++ |
|---|
| + | [* 3] 30x37x4mm 6706 Bearing (x1) |
|---|
| + | [* 5] M3 x 20mm Screws (x8) |
|---|
| + | [* 6] M3 Hex Nuts (x11) |
|---|
| + | [* 7] Insert ***M3 Hex Nuts*** in the nut inserts of ''++Both Output Disks++'' |
|---|
| + | [* 8] Clamp the ***6706 bearing*** with the Output Disks using ***M3x20mm Screws*** |
|---|