Changes to Step #7

Edit by Dan Royer —

Edit approved by Dan Royer

Before
After
Unchanged

Step Lines

+[title] Hand Gearbox - Output Disk
+[* 10] Prepare the Following Parts
+ [* 2] 6D output disk parts
+ [* 3] M3 x 20mm Screws (x8)
+ [* 4] M3 Hex Nuts (x11)
+ [* 5] 30x37x4mm 6706 Bearing (x1)
+[* 1] Insert 3 x M3 Hex nuts in the top output disk
+[* 7] Clamp the 6706 bearing with 2 output disk using M3x20mm Screws and nuts
+[* 8] Slide the housing Top onto the bearing