| - | [* 1] Insert wisdom here. |
|---|
| + | [* 1] Insert the thicker eccentric cam on the brass tube and ***align the set screw holes*** and insert the set screws [PIC REQUIRED] |
|---|
| + | [* 9] Make sure the Set Screw screws in just enough to put the bearing in, DON'T SCREW ANY MORE THAN THAT! |
|---|
| + | [* 7] Place the ***"B" Rotor*** onto the eccentric cam [PIC REQUIRED] |
|---|
| + | [* 9] Notice that the Rotor has a side that catches the outer part of the bearing. Make sure this side is facing up (away from the bevel gear) |
|---|
| + | [* 4] Repeat with the second (thinner) eccentric cam and ***"T" Rotor*** [PIC REQUIRED] |
|---|