Changes to Step #2

Edit by Dan Royer —

Edit approved by Dan Royer

Before
After
Unchanged

Step Lines

[title] Hand Gearbox - Input Shaft & Rotor Parts
[* 10] ***Prepare the following components:***
[* 1] [3D] - 6D Hand Gearbox Rotors
[* 2] [3D] - 6D Hand Gearbox Eccentric Cams
- [* 3] 5/16' x 19.5mm Brass Tube {machined}
- [* 5] [12x18x4mm] 6701 Bearing (x3)
- [* 6] M3x4mm SetScrew (x3)
-[* 10] ***Rotors*** are Labelled ***"T" and "B"*** for Top and Bottom
-[* 10] ***Eccentric Cams*** also have Top and Bottom, ++''Thick Piece = Bottom and Thin Piece = Top''++
+ [* 3] [3D] - Hand Gearbox Bevel Gear
+ [* 5] 5/16' x 19.5mm Brass Tube {machined}
+ [* 6] [12x18x4mm] 6701 Bearing (x4)
+ [* 7] M3x4mm SetScrew (x3)
+[* 10] ***Rotors*** are Labelled ***"T" and "B"*** for Top and Bottom according to ***Eccentric Cams'*** Top and Bottom, ++''Thick Piece = Bottom and Thin Piece = Top''++