Changes to Step #28
Step Lines
| + | [title] Final Cable Assembly - DM542T & DM556T Signal Wiring |
|---|---|
| + | [* 2] Grab one of the Bigger Driver's 4-pin Screw Terminal and wire it as shown in the first picture, ***Screw Head is pointing UP*** |
| + | [* 3] Starting with M0 Cables that's already attached to ***Arduino Mega Shield***, secure the wire as shown in the second picture. |
| + | [* 9] notice there are 2 black wires in the right most pin of the 2-pin connector |
| + | [* 8] Repeat the same process for the M1 and M2 Drivers, and plug them as shown in the third picture. |
Image 1
No previous image
Added
Image 2
No previous image
Added
Image 3
No previous image
Added