| - | [* 2] Pull all the Screw Terminal Blocks off from the Drivers |
|---|
| - | [* 3] Starting with a single DM542T Driver Adapter, secure each drivers to the Case |
|---|
| - | [* 6] Make sure the adapters are aligned as shown in the picture, Label on the DM542T and DM556T Drivers are facing away from the PSU |
|---|
| - | [* 8] For DM320T Drivers, 4 pin side is closer to the Label of DM542T Driver |
|---|
| + | [* 2] Pull all the ***Screw Terminal Blocks off*** from the Drivers |
|---|
| + | [* 3] Starting with a single DM542T Driver Adapter, ++secure each drivers to the Case++ |
|---|
| + | [* 6] Make sure the adapters are aligned as shown in the picture, ++Label on the DM542T and DM556T Drivers are facing away from the PSU++ |
|---|
| + | [* 8] For DM320T Drivers, ***4 pin side is closer to the Label of DM542T Driver*** |
|---|