Changes to Step #23

Edit by Dan Royer —

Edit approved by Dan Royer

Before
After
Unchanged

Step Lines

[title] Stepper Drivers Installation - DM320T
[* 2] Starting with the Smaller "DM320T" Drivers, screw in ***M3x10mm Screws*** in the Adapter with 3 small slots
[* 3] One driver at a time, secure the drivers to the adapter using ***M3 Nylock Nuts***, use Needle Nose Plier to hold the nuts.
-[* 4] Repeat the process for the rest of the DM320T Drivers
+[* 4] ++Repeat++ the process for the rest of the DM320T Drivers