Changes to Step #23

Edit by Dan Royer —

Edit approved by Dan Royer

Before
After
Unchanged

Step Lines

[title] Stepper Drivers Installation - DM320T
-[* 2] Starting with the Smaller "DM320T" Drivers, screw in M3x10mm Screws in the Adapter with 3 small slots
-[* 3] One driver at a time, secure the drivers to the adapter using M3 Nylock Nuts, use Needle Nose Plier to hold the nuts.
+[* 2] Starting with the Smaller "DM320T" Drivers, screw in ***M3x10mm Screws*** in the Adapter with 3 small slots
+[* 3] One driver at a time, secure the drivers to the adapter using ***M3 Nylock Nuts***, use Needle Nose Plier to hold the nuts.
[* 4] Repeat the process for the rest of the DM320T Drivers