| - | [* 2] Secure the assembled Arduino Tray with the Right Angle D-Sub Connector to the Case Wall Adapter Slot using the Hex Head Screws |
|---|
| - | [* 8] Align the Tray to the Standoff and secure it using the ***M3x10mm Screws*** |
|---|
| - | [* 5] Once everything is aligned, secure this alignment by tightening the screw and the nut on the Case Wall Adapter |
|---|
| + | [* 2] Secure the ***Right Angle D-Sub Connector*** to the ++Case Wall Adapter++ slot using the ++Hex Head Screws++ |
|---|
| + | [* 8] Align the ++Tray to the Standoff++ and secure it using the ***M3x10mm Screws*** |
|---|
| + | [* 5] Once everything is aligned, secure this alignment by ++tightening the screw and the nut++ on the ***Case Wall Adapter*** |
|---|