Changes to Step #21

Edit by Dan Royer —

Edit approved by Dan Royer

Before
After
Unchanged

Step Lines

[title] Arduino Installation - Tray Mounting
[* 2] Secure the assembled Arduino Tray with the Right Angle D-Sub Connector to the Case Wall Adapter Slot using the Hex Head Screws
-[* 8] Align the Tray to the Standoff and secure it using the M3x10mm Screws
+[* 8] Align the Tray to the Standoff and secure it using the ***M3x10mm Screws***
[* 5] Once everything is aligned, secure this alignment by tightening the screw and the nut on the Case Wall Adapter