Changes to Step #18

Edit by Dan Royer —

Edit approved by Dan Royer

Before
After
Unchanged

Step Lines

[title] Arduino Installation - Arduino Mega Shield
-[* 2] Insert the Mega Shield to the Arduino Mega
- [* 9] Make sure you have set the voltage regulator in*** Step 11*** before going forward
-[* 3] Remove the hex head screw from the Right Angle D-Sub Connector
+[* 2] Insert the ***Mega Shield*** to the++ Arduino Mega++
+ [* 9] Make sure you++ have set the voltage regulator++ in*** Step 11*** before going forward
+[* 3] Remove the ++hex head screw++ from the*** Right Angle D-Sub Connector***