Changes to Step #17
Step Lines
| + | [title] Arduino Installation - Tray Preparation |
|---|---|
| + | [* 2] Align the Holes on the Tray and the Arduino Mega |
| + | [* 3] Use the M3x10mm Screws and M3 Nylock Nuts to secure the Arduino to the Tray |
| + | [* 9] Make sure to tighten the screws just enough to hold them together, No more, since over-tightening the screws can damage the board. |
Image 1
No previous image
Added
Image 2
No previous image
Added
Image 3
No previous image
Added