Changes to Step #13

Edit by Dan Royer —

Edit approved by Dan Royer

Before
After
Unchanged

Step Lines

[title] Power Supply Installation - Final Installation
[* 2] Connect the rest of the power Wires
[* 3] Small Stepper Driver Wires (***22AWG 335mm*** long)
[* 4] Big Stepper Driver Wires (***18AWG 160mm*** long)
-[* 5] Using a wire cutter to snip two pegs positioned respect to Rocker Switch on the Top Right Corner of the picture
+[* 5] Using a wire cutter to ***snip two pegs*** ++positioned respect to Rocker Switch++ on the Top Right Corner of the picture
[* 6] Align the Half Moon slot and secure the mounting plate to the Case using ***M3x8mm Screws*** in the available spots around PSU.